pH solutions begin on page 2.158; see specific cleaning solutions on 2.172 HI981035 Sushi pH Tester with specialized probe The HI981035 Foodcare Sushi pH tester is an application specific designed pH tester for the measurement of pH of sushi rice as part of a Hazardous Analysis of Critical Control Points (HACCP) plan. This tester offers many advanced features including a pH electrode designed specifically for sushi. • Flat tip pH sensor · A flat tip pH electrode allows for the direct measurement of solids by simply touching the surface of the product. No need to make slurries with purified water. • pH Electrode with open junction · The pH electrode of this tester uses an open outer junction design. The open junction is clog resistant due to the hard gel surface known as Viscolene that is used for the reference cell. When the junction becomes coated with starch from the rice simply clean the probe to expose the viscolene reference. • Titanium body · A titanium body offers additional protection as compared to traditional glass body pH probes. • Large LCD · An enhanced LCD displays the measurement reading, stability indicator, low battery indicator, and calibration tags. • Automatic calibration · The Foodcare Sushi pH Tester is calibrated automatically to one or two points. The calibration buffers are automatically recognized and after calibration the buffer values used are shown on the display. • Automatic temperature compensation • Stability indicator · An hourglass indicator is displayed on the LCD until a stable reading is obtained. Once a reading stabilizes, the indicator disappears and a reading can be taken. • Automatic shut-off · The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto-off feature can also be disabled. • Probe diagnostic · During calibration the meter will display an error (Err) message as an indicator that the probe needs to be cleaned. • Long battery life · The Foodcare Sushi pH Tester has an exceptional battery life of approximately 800 hours. When the battery power is running low, the low battery indicator blinks. • Economical · The Foodcare Sushi pH Tester is a feature rich meter at a price that is affordable for both the hobbyist and professional. Flat tip electrode Easy to clean electrode with a maintenance-free gel electrolyte Specifications HI981035 pH Range 0.00 to 12.00 pH Resolution 0.01 pH Accuracy (@25°C/77°F) ±0.05 pH Calibration automatic, one or two-point Additional Specifications Temperature Compensation automatic, 0 to 50°C (32 to 122°F) Glass Type LT (low temperature) Battery Type / Life CR2032 Li-ion / approx. 800 hours of continuous use Auto-off 8 minutes, 60 minutes, or disabled Environment 0 to 50°C (32 to 122°F); RH 95% max Dimensions 51 x 160 x 21 mm (2 x 6.3 x 0.9“) Weight 52 g (1.8 oz.) Ordering Information HI981035 is supplied with pH 4.01 buffer solution sachets (2), pH 7.01 buffer solution sachets (2), electrode cleaning and disinfection solution sachets (2), electrode storage solution, CR2032 3V Li-ion battery, quality certificate, and instruction manual. Supplied complete Supplied complete with meter, probe, calibration solutions, and cleaning solutions 1 Testers and Monitors 1.27 www.hannainst.com | testers
RkJQdWJsaXNoZXIy MTI3NTM=