HI98127 (pHep®4) · HI98128 (pHep®5) pH and Temperature Testers • Waterproof · Designed to float if accidentally dropped in water • Up to three-point calibration (HI98128) • Automatic Temperature Compensation · All readings are compensated for variations in temperature · Temperature displayed in °C or °F along with pH reading • Stability indicator · Meter displays a tag that will disappear when the reading has achieved stability • HOLD button · Freezes reading on the display to allow recording of measurement • BEPS (Battery Error Prevention System) · Meter will automatically shuts off if there is not enough power to get an accurate measurement • Battery % level at startup • Low Battery Indicator • Automatic Shut-Off · The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto off feature can be disabled. The pHep®4 and pHep®5 are waterproof pH testers that have many advanced features found in more expensive portable instrumentation. These ergonomic meters feature automatic one , two or (HI98128) three-point calibration to a known buffer, automatic temperature compensation, battery percent level indicator at start up, and a stability indicator to alert the user when a stable reading has been obtained. The large multi level LCD display shows both pH and temperature simultaneously. These meters also feature the HI73127 replaceable electrode with a stainless steel round connector. This cartridge design has no pins which could bend or break. 1 Testers and Monitors 1.14 | www.hannainst.com testers
RkJQdWJsaXNoZXIy MTI3NTM=